|
|
 Heavy Equipment,
Off Road & Construction
The superior performance and protection provided by
AMSOIL synthetic lubricants adds up to increased productive time and
profits.
|
|
 Why
synthetic? Because synthetic lubricants are superior to conventional
petroleum lubricants. Petroleum lubes are refined from crude oil, a
natural substance pumped from the earth and containing diverse
chemicals. Some of the chemicals in petroleum oil are detrimental to
the lubrication process and to the lubricated components. For example,
some petroleum oil chemicals invite oxidation in high-temperature
operations. Oxidation quickly destroys lubricant integrity.
Synthetic lubes,
on the other hand, are not refined from crude oil, but constructed from
pure chemicals selected for their ability to lubricate. The purity of
synthetic lubricant basestocks significantly reduces lubricant
oxidation, which promotes the ability of synthetics to be used in higher
temperature applications than conventional lubes may be and promotes
their ability to be used for extended drain intervals. In fact, AMSOIL
synthetic lubricants are specifically formulated for extended drain
intervals.
 Synthetics are
also free of the paraffin’s found in conventional petroleum oils. With
no paraffin to congeal at low temperatures, synthetics maintain better
low-temperature fluidity than petroleum oils do, which protects
equipment operating in cold environments — even the relative cold of a
just-started engine.
The precise blend
of synthetic base stocks and high-quality additives promotes superior
lubrication and friction reduction, which in turn promotes superior
heat control, wear control and energy efficiency. Molecular uniformity
also helps synthetics maintain their protective viscosity in
high-temperature operations, which also promotes superior wear control.
Diesel Motor Oils
Wear Control AMSOIL synthetic diesel motor oils have been proven to keep wear rates lower than conventional oils. Synthetic base stocks are tailored to reduce friction more effectively than conventional base stocks, which lowers wear rates and helps keep engine heat from climbing excessively. Outstanding quality antiwear additives protect surfaces from wear in conditions that prevent a full lubricating
film from developing. Acid Neutralization and Soot Control AMSOIL synthetic diesel motor oils are proven to neutralize acids and control corrosion for longer periods than conventional oils. The top-quality detergents responsible for long-term acid neutralization also inhibit deposit formation on hot engine surfaces. The highly-effective dispersants in AMSOIL synthetic diesel motor oils control soot and other contaminants, providing long-lasting protection against wear and sludge formation. Low Temperature Fluidity AMSOIL synthetic diesel motor oils remain fluid in low temperatures. Low-temperature fluidity helps engines start in cold temperatures and ensures rapid cold-temperature post-startup protection. |
|
Fuel Economy AMSOIL synthetic diesel motor oils have a low friction coefficient
that improves fuel economy by reducing the loss of power to friction. Fuel
economy increases of five percent are common with AMSOIL synthetic diesel motor oils. Chemical and Physical Stability AMSOIL synthetic diesel motor oils offer superior thermal, oxidative and shear stability. Thermal stability allows them to work in high temperatures without undergoing molecular breakdown and consequently increasing oil consumption and starting the formation of sludge. Oxidative stability allows them to work in high temperatures without undergoing chemical changes leading to oil thickening, loss of lubricating ability, and sludge and acid formation. Shear stability keeps them from falling out of viscosity grade and losing their ability to protect against metal-to-metal contact and wear in engine operating temperatures as a result of shear forces. Reduced Downtime
AMSOIL synthetic diesel motor oils help decrease downtime and increase profits with better protection and less expense.
|
|
Signature
Series Max-Duty Diesel Oils
Protect your investment in diesel power and confidently extend
drain intervals with our top-grade synthetic diesel oil. AMSOIL
Signature Series Max-Duty Synthetic Diesel Oil delivers 6X more
wear protection, giving your diesel the extra protection it
deserves. Advanced synthetic technology provides excellent viscosity
control and outstanding extreme-temperature performance, while
minimizing oil consumption. The result: protection that’s boosted to
the max.
more information
100% Synthetic Diesel Oil
With rapidly rising new-vehicle pricing and the high cost of repairs,
drivers are keeping their vehicles on the road longer than ever.
Preventive maintenance that includes high-quality lubricants is key
for keeping vehicles safe and dependable for the long haul. AMSOIL
100% Synthetic High-Mileage Motor Oil is designed specifically for
the unique demands of high-mileage engines, helping extend the life
of your vehicle. It delivers purpose-built protection at a time in
your vehicle’s life where it could benefit from more-robust
maintenance. It cleans and protects engines with boosted detergency
and an additive package that fights oil breakdown and oil leaks.
more information
Premium Protection
Oils
For
use in both diesel and gasoline engines. Ideal for applications where
the extra protection of a higher-viscosity oil is desired. The higher
viscosity may help reduce motor oil consumption in equipment
experiencing higher than normal oil usage rates while running lower
viscosity lubricants.
more information
| |
Heavy Duty Motor Oils
Heavy-Duty Synthetic Diesel Oil
Formulated for Exceptional Diesel Engine Protection AMSOIL
Heavy-Duty Synthetic Diesel Oil is formulated for
hard-working equipment. It is engineered to provide 4X
better wearprotection,1 giving you the edge to keep trucks
and equipment operating at peak performance. AMSOIL
Heavy-Duty Synthetic Diesel Oil offers outstanding value and
provides excellent protection for customers seeking an
upgrade over conventional, synthetic-blend or competing
synthetic diesel oils
more information
Heavy-Duty Diesel & Marine Motor Oil 15W-40
Engineered for
pre-2007 diesel engines in on-road applications as well as all model
year diesel engines in off-road applications. High 12 TBN controls acids
from combustion blow-by and EGR. Additives control soot thickening,
oxidation and wear. Extended drain capabilities reduce downtime and
motor oil expenses.
AMSOIL Synthetic Heavy Duty Diesel & Marine Motor
Oil is a premium diesel oil providing excellent performance in all types
of diesel engines where highly effective control of wear and deposits is
vital. Engineered with heavy-duty dispersant/detergent additives, its
Total Base Number (TBN) of 12 neutralizes acids and controls soot
thickening from Exhaust Gas Recirculation (EGR) and blow-by to protect
against corrosion, cylinder bore polishing (wear) and varnish/sludge
deposits. AMSOIL 15W-40 Diesel Oil resists heat and breakdown better
than conventional petroleum oils for long-lasting performance and
protection.
more information
Commercial Grade Diesel
Oils
AMSOIL Commercial-Grade Diesel Oil is an
advanced
synthetic-blend oil with greater than 50% synthetic content.
Specially engineered for commercial equipment, it provides 2X
better
wear protection,1 helping you keep trucks and equipment
operating at
peak performance. AMSOIL Commercial-Grade
Diesel Oil provides
outstanding value and excellent protection
for customers seeking an
upgrade over conventional diesel oils.
more information
|
AMSOIL CJ-4 oils retain there viscosity in the
face of shearing forces. With a 4% fuel dilution AMSOIL delivered,
while the competition failed. See the
report
here.
Gasoline Motor Oils
|
Construction vehicles are often subjected to periods of heavy throttle
application, towing and dirty, off-road driving. These harsh
operating conditions mean
Construction vehicles demand extra
protection from a motor oil. AMSOIL synthetic motor oils are
formulated with the most advanced chemistries available. High
quality base stocks combined with an exact blend of premium
additives, provide second-to-none protection and performance in the
most demanding operating conditions.
Clean All-Temp Protection
AMSOIL
synthetic motor oils not only run clean in high temperatures, they
actually help hold down engine heat during high stress operations.
In cold temperatures, AMSOIL synthetic motor oils flow readily,
providing dependable starting and quick post-startup protection.
Load Protection
Towing and
travel over rough terrain put extra load on the engine. AMSOIL
synthetic motor oils provide an extremely durable lubricating film,
one that’s tough to break no matter how heavy the load. A robust
package of anti-wear additives insures protection against
accelerated wear during high load operation. The shearing forces
generated inside today’s high RPM automobile engines can literally
tear apart the molecules of conventional oils. AMSOIL synthetic
motor oils, because of their unique synthetic construction,
withstand shearing forces. AMSOIL motor oils don’t thin out and lose
viscosity like conventional oils do.
To see a larger image click on it
Power and Fuel Economy
Conventional
motor oils tend to “boil off” in high temperatures. Vaporized oils
grow thick and heavy. They circulate poorly, reduce fuel efficiency
and contribute to excessive emissions and engine wear. Of course,
oil consumption skyrockets as oil boils off.
AMSOIL
synthetic motor oils’ superior vaporization resistance keeps fuel
economy high, oil circulation efficient, and oil consumption,
emissions, and most importantly, engine wear, to a minimum. AMSOIL
synthetic motor oils allow engines to run smoother and easier,
producing more power and performance and better fuel economy.
Resist
Oxidation
Conventional
oils oxidize in high temperatures, causing sludge and deposit
build-up that decrease fuel efficiency, contribute to corrosion and
increase 0.4 engine wear. AMSOIL synthetic motor oils resist
oxidation and thermal breakdown far better than conventional oils.
Because AMSOIL motor oils’ synthetic formulation resists oxidation
so well, they run naturally cleaner than conventional oils. AMSOIL
motor oils have a superior detergent/dispersant additive package
that, when tested after tens of thousands of miles of use in the
crankcase, still exhibits outstanding deposit control.
Signature Series Motor Oils
Signature Series Synthetic Motor Oil delivers
extraordinary lubrication in all types of automotive gasoline engines.
Combining the industry-premier synthetic technology with AMSOIL premium
additives, AMSOIL Signature Series Synthetic Motor Oil exceeds the
higher performance demands of modern engines, withstanding the stress of
higher horsepower, higher heat and complicated emissions control
systems. Signature Series Synthetic Motor Oil is engineered to
outperform competitive conventional and synthetic motor oils and
delivers long-lasting performance and protection for up to
25,000-mile/one-year drain intervals.
more information
Premium Protection
Oils
For
use in both diesel and gasoline engines. Ideal for applications where
the extra protection of a higher-viscosity oil is desired. The higher
viscosity may help reduce motor oil consumption in equipment
experiencing higher than normal oil usage rates while running lower
viscosity lubricants.
more information
| |
To see a larger image click on it
Resist Volatilization
The unbalanced
hydrocarbon structure of conventional petroleum-based motor oils
contains molecules of many different shapes and sixes. In high
temperatures the lighter molecules tend to vaporize, leading to oil
consumption, oil thickening, and loss of performance. AMSOIL
synthetic motor oils don’t burn off during high-temperature,
high-stress operation. Their pure, uniform molecules provide an
unsurpassed level of stability, even under the most extreme
operating conditions.
Save Money
Reduced
maintenance costs through better protection, fewer new parts to buy
and extended drain intervals save 4x4 owners hundreds, sometimes
thousands of dollars every year.
Reduce wear
The primary
function of oil is to prevent friction and wear. AMSOIL synthetic
motor oils are made from the finest synthetic base stocks and most
advanced additive packages. The uniform molecular structure of
AMSOIL synthetic motor oil ensures their durability and
effectiveness. The additives protect engines by bonding to metal
surfaces and forming
a protective
film layer between moving parts that are vulnerable to friction and
wear when an engine is first started and before the oil begins to
circulate completely. AMSOIL synthetic motor oils provide the
ultimate in wear protection in high-stress and heavy-load driving
conditions.
To see a larger image click on it
The Four Ball Wear Test
determines the wear protection properties of a lubricant. The
smaller the average wear scar, the better the wear protection
provided by the lubricant.
XL Motor Oils
XL Extended Life Synthetic Motor Oils provide better wear
control, high- and low-temperature protection and increased fuel
economy compared to conventional oils. Formulated with
extended-drain boost technology, AMSOIL XL Synthetic Motor Oils
provide superior performance for up to 10,000-miles/six months, or
longer when recommended in owner’s manuals or indicated by
electronic oil life monitoring systems.
OE Motor Oils
OE Synthetic Motor Oils help provide better wear control,
high- and low-temperature protection and increased fuel economy
compared to conventional oils. The oil drain interval
recommendations for many of today’s vehicles extend well beyond the
traditional 3,000-mile interval, some up to 12,000 miles with
electronic oil monitoring systems. AMSOIL OE Oils provide excellent
protection and performance for the entire length of the original
equipment manufacturer’s recommended drain interval.
more information
|
Filters
 AMSOIL has introduced more new products and made more
technical advances than during any other period in the company’shistory. AMSOIL offers high quality filtration products from
other manufacturers such as Donaldson and WIX. Recently, AMSOIL’s focus has been on the filtration market. The
launched Ea Filter line includes the finest filtration products in
the world for the auto/light truck market, and Donaldson covers the
heavy-duty market. To complement the Ea line of filters, AMSOIL now
offers WIX and MANN filters, allowing one-stop shopping for automotive
customers. AMSOIL carries over 700 WIX air, oil, fuel, and
transmission filters for all truck applications
|
EA Heavy-Duty
Extended-Life OilFilters
 AMSOIL Ea Heavy-Duty Extended-Life Oil
Filters provide excellent filtering efficiency and high
levels of contaminant capacity for heavy-duty on- and off-road
gasoline and diesel applications. They provide extended service
intervals that coincide with the maximum drain interval
recommendations of AMSOIL synthetic motor oils (not to exceed one
year), increasing convenience and reducing maintenance costs. Ea
Heavy-Duty filters offer AMSOIL quality at competitive prices.
more information
The
Filter Cross Reference guide
will return the corresponding AMSOIL, Donaldson, MANN, and WIX
filter(s) for any manufacturer filter number
|
|
Ea Oil Filters
 AMSOIL Ea Oil Filters offer the highest efficiency rating in the industry.
Their small synthetic nanofibers trap smaller particles and hold
more contaminants, resulting in lower restriction. AMSOIL EaO
Filters have a far greater capacity than competing filter lines.
When used in conjunction with AMSOIL Ea15K
Filters are guaranteed for up to 15,000 miles/one year, whichever
comes first, and EaO Filters are guaranteed for up to 25,000
miles/one year, whichever comes first, depending on application and
severity of service.
more information
|
Donaldson Blue Oil Filters
For over 100 years, Donaldson has been solving customers' complex
filtration needs. Today, Donaldson is one of the largest providers
of unique filtration technologies and high-quality filters and
parts.
Donaldson lube filters keep oil clean by capturing
contaminants that can cause engine damage. Donaldson carries a
complete line of oil filters for diesel engines – in both standard
life and Donaldson Blue® for extended service intervals.
more information
Donaldson P-Series
Oil, Air, Fuel, Hydraulic and Coolant Filters.
 With
many applications that differ from, and several that coincide with the
Endurance line, Donaldson P-Series filters offer premium filtration at a
competitive price. Donaldson P-Series filters feature housing constructed
with heavy gauge steel and domed construction, providing superior pressure
fatigue performance. Donaldson P-Series oil filters are constructed with
either full synthetic media or synthetic blends for high efficiency. The
center tube allows more flow without compromising strength, and the louvered
design eliminates tearing during pleat movement. The media is embedded
deeper into the sealing plastisol than conventional filters, allowing better
sealing longevity. Additional features include a nitrile sealing gasket, a
fully tucked seam, roll formed threads and a compression spring holding all
the components in place within the filter.
more information
Oil Filters
 Donaldson P-Series oil filters feature housing constructed with heavy gauge
steel and domed construction, providing superior pressure fatigue
performance. Donaldson P-Series oil filters are constructed with either full-synthetic media or synthetic blends for high efficiency.
The center tube allows more flow without compromising strength, and the louvered design eliminates tearing during pleat movement.
more information
Fuel Filters
 Donaldson fuel filters provide clean, filtered fuel that prevents pump wear, injector clogging, and premature engine wear and can boost fuel efficiency.
AMSOIL offers a complete line of spin-on and cartridge-style Donaldson fuel
filters. Donaldson filter media features a multiple-layered design specifically made to remove water and contaminants from the fuel stream.
more information
|
|
Air Filters
 Donaldson air
filter media is made up of specially formulated fibers designed to
trap contaminants such as dust, dirt and soot before they reach the
engine. The media is pleated to maximize the filter surface area and
placed between rigid liners to provide stability and. support. A
high quality filter seal is applied or built-in to the open end of
the filter to prevent dirty air from bypassing the filter. Donaldson
has developed an extensive range of air filter media to provide the
best engine protection no matter what the operating conditions. For
example, using the same particle size contaminant, for every eight
grams of dirt passed through a Luber-finer filter, the Donaldson
filter passed only two grams.
more information
Coolant Filters
 Donaldson
P-Series coolant filters remove contaminants from the cooling system,
minimize the risk of filter plugging and keep engines running efficiently.
more information
Hydraulic Filters
 AMSOIL offers a full line of hydraulic filters from Donaldson. Donaldson
P-Series hydraulic filters provide superior protection for hundreds of machinery and component applications, both in the factory and on heavy-duty equipment.
more information
|
WIX Filters
 WIX is
well-known around the world for its innovative filtration products
for the automotive and light truck market. Founded in 1939, the
Gastonia, N.C., company earned acclaim during World War II when it
created an oil filter out of a paper tube, wooden plugs and yarn
when steel was in short supply. In 1954 WIX created the
revolutionary spin-on oil filter that was eventually adopted as
original equipment on most vehicles.
Today WIX
manufactures some of the best oil, air, lube, cabin air, hydraulic,
fuel, crank case breather and transmission filtration products on
the market. The company is also widely known for its support of
NASCAR.
more information
Ea By-Pass
Filters
|
The Ea By-Pass
Oil Filter (EaBP) provides the best possible filtration protection
against wear and oil degradation. Working in conjunction with the
engine’s full-flow oil filter, the AMSOIL Ea By-Pass Filter operates
by filtering oil on a “partial-flow” basis. It draws approximately
10 percent of the oil pump’s capacity at any one time and traps the
extremely small, wear-causing contaminants that full-flow filters
can’t remove. The AMSOIL Ea Bypass Filter typically filters all the
oil in the system several times an hour, so the engine continuously
receives analytically clean oil.
Ea By-Pass Filters
 AMSOIL Ea
By-Pass (EaBP) Filters provide higher filtering efficiency, soot
removal and increased oil capacity due to new media composition and
configuration. AMSOIL EaBP Filters have an efficiency of 98.7
percent at two microns. At normal operating RPMs the EaBP Filter
will filter all of the oil in a
typical five quart sump in less than
10 minutes. The superior construction of AMSOIL EaBP Filters
provides better sealing and increased longevity along with superior
corrosion resistance.
more information
By-Pass Filter Systems
The Ea By-Pass
Oil Filter (EaBP) provides the best possible filtration protection
against wear and oil degradation. Working in conjunction with the
engine’s full-flow oil filter, the AMSOIL Ea By-Pass Filter operates
by filtering oil on a “partial-flow” basis. It draws approximately
10 percent of the oil pump’s capacity at any one time and traps the
extremely small, wear-causing contaminants that full-flow filters
can’t remove. The AMSOIL Ea Bypass Filter typically filters all the
oil in the system several times an hour, so the engine continuously
receives analytically clean oil.
Learn More About By-Pass Systems
By-Pass Filters & Systems
By-Pass Filtration System
Application Guide
|
|
To see a larger image click on it
Dual Gard By-Pass Filtration
 The AMSOIL Dual-Gard
By-Pass Oil Filtration System links two AMSOIL By-Pass Filter Elements
together for engines with sump capacities over 20 quarts. Allows fast and
simple servicing with spin-on elements.
Wear tests have shown particles of contamination in the sub-20-micron range
are most harmful to rings and bearings. Most trucks are sold with a
full-flow filter as their only oil cleansing unit.
The
layered synthetic/cellulose composite media by-pass filter has been shown to
reduce piston ring, and rod/main bearing wear.
more information
To see a larger image click on it |
Antifreeze and Engine Coolant
AMSOIL Antifreeze & Coolant provide superior
heat transferee excellent protection against corrosion,
cylinder-liner cavitation,freezing and boil-over. They provide
maximum protection in extreme temperatures and operating conditions,
and they provide superior protection for aluminum, steel, cast iron,
copper, brass and solder alloys.
more information
Gear Lubes
Load-Bearing
& Extreme Pressure Protection AMSOIL synthetic gear lubes are formulated to protect gears operating in heavily loaded conditions, whether or not the gears operate with full film lubrication. Superior film strength and viscosity retention offer superior protection in full film regimes, while top-quality extreme pressure agents protect when a full lubricating film does not separate gear surfaces. The thermal durability of AMSOIL synthetic gear lubes ensures extreme-pressure protection after extended exposure to extreme temperatures. The extreme pressure agents in conventional gear lubes sometimes lose their effectiveness after extended exposure to high temperatures, leaving gears vulnerable to metal-to-metal contact and wear. Friction Reduction
AMSOIL synthetic gear lubes effectively reduce friction, power losses and
temperatures through the use of high-quality synthetic oils and an extra
treatment of extreme pressure additives. Reduced axle friction is associated
with reduced fuel consumption and can save fleets thousands of dollars per year. High- and Low-Temperature Performance AMSOIL synthetic gear lubes maintain their viscosity better with changes in temperature than conventional lubes, which allows them to protect over a broader temperature range.
They maintain better low-temperature fluidity than conventional gear lubes, while also protecting better in higher temperatures. |
| Extended Drains
In commercial line haul trucks, AMSOIL gear lubes may be used up to 500,000 miles. In cars, SUVs and light-duty trucks AMSOIL gear lubes greatly exceed original equipment manufacturer’s petroleum gear lube drain intervals and may be
used up to 50,000 miles in severe service or
 100,000 miles in normal service, or according to the owner’s manual,
whichever is longer.
more information
Additional Benefits AMSOIL synthetic gear lubes provide limited slip capability, and may be used in limited slip differentials without special additives. AMSOIL synthetic gear lubes also provide outstanding protection against rust, which is important for stored equipment. Severe Gear Synthetic EP Gear Lubes
 Specifically
engineered for high demand applications, including trailer towing, heavy
hauling, 4X4 off-road driving, commercial use and racing. Superior lube film
strength combined with extra additives protects gears and bearings from
scoring and wear. Resists high heat and possesses excellent cold-flow
properties. AMSOIL Severe Gear outperforms all conventional gear oils. Compatible with most limited-slip differentials.
75W-90
more information
75W-110
more information
75W-140
more information
|
Transmission Fluid
Torque-Drive™ Automatic
Transmission Fluid
 Engineered to eliminate deficiencies common to all conventional
petroleum ATFs, AMSOIL Torque-Drive provides superior performance
and protection against thermal and oxidative degradation, sludge and
varnish formation, viscosity shear down, cold-temperature oil
thickening, poor friction stability, high component wear and
shortened oil life. Automatic transmission operating expenses can be
directly linked to transmission fluid quality. Poor-quality oils
need frequent changes and reduce the effective service life of
transmissions. Delivering maximum oxidation resistance, wear control
and friction performance, AMSOIL Torque-Drive extends lubricant life
and provides protection beyond that possible from conventional ATFs.
Immediate financial benefits are possible upon the installation of
AMSOIL Torque-Drive. Vehicles stay on the road longer, unnecessary
labor and maintenance costs are reduced, and the return on costly
transmission investments is maximized.
AMSOIL recommends
Torque-Drive® for use in all automatic transmissions requiring any
of the following specifications: Allison® TES 295, TES 389, C-4;
Voith® 55.6336.XX; ZF® TE-ML 14C; GM Dexron® III; Ford Mercon®;
Mercedes-Benz® 236.10
more information
SAE 10W, 30, 50
AMSOIL Synthetic SAE 50 Powershift Transmission Fluid exceeds Fuller CD-50 performance specifications and is ideal for use in Fuller, Rockwell, Spicer, Fabco, Warner and other large truck manual transmissions.
Wear Protection
AMSOIL Synthetic Powershift
Transmission Fluids are formulated for superior wear protection, without viscosity index improvers. They maintain grade throughout service life, providing long-term protection against equipment wear, even when equipment is frequently subjected to sustained periods of applied pressure or high horsepower and high torque.
High and Low - Temperature Performance
AMSOIL Synthetic Powershift Transmission Fluids provide superior protection in high temperatures. They inhibit the formation of varnish, deposits and sludge, while their excellent heat transferring abilities help hot-running equipment operate up to 50°F cooler. In low temperatures, AMSOIL Synthetic Powershift
Transmission Fluids flow
readily for dependable startup and post-startup protection
Extended Drains
AMSOIL Synthetic Powershift
Transmission Fluids provide two to five times the service life of conventional
petroleum fluids if kept free of dirt and moisture. They may be used in manual
transmissions for 250,000 miles or five years, whichever comes first.
AMSOIL SAE 50 Long-Life Synthetic
Transmission Oil
 AMSOIL SAE 50 Long-Life Synthetic Transmission
Oil is specially formulated to meet the demanding requirements of
manual transmissions found in high-torque, heavy-duty line-haul
trucks and other commercial applications. Its synthetic base stocks
and premium additives help reduce gear and bearing wear, improve shifting and extend transmission life throughout
drain intervals of up to 500,000 miles/five years. Compared to
conventional fluids, Long-Life Synthetic Transmission Oil can help
operators reduce maintenance costs and increase productivity.
more information
Greases
AMSOIL synthetic greases offer the superior properties of
synthetic oils, premium quality lithium complex thickeners and
top-quality performance additives.
Broad
Temperature Performance
AMSOIL synthetic
greases perform across a broader temperature range than other greases
do. One AMSOIL synthetic grease may replace two conventional, seasonal
greases, reducing inventory and the possibility of misapplication.
Extreme Pressure and Load Carrying
Ability
AMSOIL synthetic
greases protect components from metal-to-metal contact, even under heavy
loads. Their extreme pressure additives form a shield against sudden or
sustained extreme loads for dependable protection from wear.
Rust and Corrosion Protection
AMSOIL synthetic
greases contain special rust and corrosion inhibitors to protect parts
from rust and corrosion.
AMSOIL synthetic
greases are compatible with most other greases and most seal materials.
Preventive maintenance practices dictate thorough removal of one grease
before installing a new grease, even when grease incompatibility is not
expected.
GL Series Multipurpose EP
Lithium Complex Greases
 AMSOIL Synthetic
GL Series Multipurpose Greases (GLC,
GLB) are the preferred greases for
high-speed/high-temperature applications and are formulated with
dissolved load carrying and extreme pressure agents. NLGI consistency
grades #0, #1, and #2.
GLC
more information
Polymeric Truck, Chassis &
Equipment Greases
 AMSOIL Synthetic Polymeric Truck, Chassis and Equipment Grease
(GPTR1,
GPTR2) delivers excellent wear
protection and extreme-pressure performance over extended service
intervals in medium- and heavy-duty applications. It combines select
base oils, proprietary synthetic polymeric chemistry, an advanced
additive package and a lithium-complex thickener for excellent
impact resistance, reliable contaminant control and maximum
longevity.
GPTR1
more information
GPTR2
more information
Water Resistant Lithium Complex
Grease
 AMSOIL Synthetic
Lithium Complex Water Resistant Grease (GWR) is formulated for utmost
protection against water. Its outstanding resistance to wash off and
anti-rust/anticorrosion activity make it the preferred grease for
components subjected to frequent or prolonged water contact. NLGI
consistency grade #2.
more information
Polymeric Off-Road Grease
 AMSOIL Synthetic Polymeric Off-Road Grease
(GPOR1,
GPOR2) combines an over-based
calcium-sulfonate complex thickener and proprietary synthetic
polymeric technology to provide outstanding performance in heavy
duty off-road applications.
GPOR1
more information
GPOR2
more information
Semi-Fluid 00 EP Grease
 AMSOIL Semi-Fluid
00 Synthetic EP Grease (GSF) is a problem-solving lubricant ideal for
leaky gearboxes in industrial and fleet applications and for use in
applications that are difficult to service. It provides superior
protection and performance in shock-loading applications that rupture
the oil film of conventional greases. NLGI consistency grade #00.
more information
Spray Grease
 AMSOIL Spray Grease effectively reduces
friction and wear, keeping components running clean and trouble-free
for outstanding performance and long life. It applies quickly and
evenly and is ideal for greasing hard-to-reach equipment, including
hinges, springs and other common applications
more information
See All Greases Here
Fuel Additives
Diesel Injector Clean
 AMSOIL Diesel
Injector Clean (ADF/ADFP) removes performance-robbing deposits from
diesel fuel injectors to help restore horsepower and improve fuel
economy. It is formulated for all types of diesel engines, including
high-pressure common-rail designs. Diesel Injector Clean is
formulated to clean both the tough-to-remove internal diesel
injector deposits surfacing in modern high-pressure common-rail
diesel engines and traditional carbonaceous deposits. Unlike
all-in-one fuel additives that may sacrifice performance in specific
areas in the name of convenience, AMSOIL Diesel Injector Clean makes
no sacrifices; it is purpose-built for diesel owners who demand
maximum results.
more information
| |
Cetane Boost
 AMSOIL Cetane Boost improves diesel fuel quality to benefit all diesel engines, especially high performance designs. AMSOIL Cetane Boost reduces operating costs by increasing fuel economy up to two percent. It improves the spontaneous auto-ignition point of diesel fuel, shortening ignition lag time and providing more complete combustion for better performance, power and drivability. AMSOIL Cetane Boost improves diesel
engine performance, increasing cetane value by up to seven points.
more information
|
Diesel Injector Clean + Cetane Boost Fuel Additive
 AMSOIL
Diesel Injector Clean + Cetane Boost (ADS) combines the superior
detergency and improved lubricity of AMSOIL Diesel Injector Clean
and the increased horsepower and cetane of AMSOIL Cetane Boost in
one convenient package. Diesel Injector Clean + Cetane Boost is
specially engineered to defend your engine and fuel system against
performance-robbing wear and deposits. Its concentrated formula
provides dependable protection in warm weather. One dose delivers
outstanding detergency, improved lubricity and higher cetane. It is
safe for use in all diesel fuels, including biodiesel.
more information
| |
Diesel Cold
Flow Improver
 Use with
AMSOIL Diesel Concentrate (ACF) to improve cold-weather performance in applications below
40°F. Lowers the cold filter plugging point by as much as 34°F and
decreases the need for #1 diesel fuel that is diluted with kerosene.
Contains jet-fuel-type deicer
to help prevent ice formation in fuels
that are contaminated with water.
more information
|
|
Diesel All-In-One Fuel Additive
 AMSOIL
Diesel Injector Clean + Cetane Boost (ADS) combines the superior
detergency and improved lubricity of AMSOIL Diesel Injector Clean
and the increased horsepower and cetane of AMSOIL Cetane Boost in
one convenient package. Diesel Injector Clean + Cetane Boost is
specially engineered to defend your engine and fuel system against
performance-robbing wear and deposits. Its concentrated formula
provides dependable protection in warm weather. One dose delivers
outstanding detergency, improved lubricity and higher cetane. It is
safe for use in all diesel fuels, including biodiesel.Diesel Cold
Flow and Diesel Cetane Boost in one convenient package
more information
| |
Diesel Recovery
 AMSOIL Diesel
Recovery quickly dissolves gelled fuel, thaws frozen fuel filters
and reduces the need for a new filter, saving both money and an
inconvenient trip to a parts store. Performs well in all diesel
fuels, including
ULSD, off-road and biodiesel. Cheap insurance
against frozen fuel.
more information
|
Maintenance & Accessory Products
 Power Foam
AMSOIL Power Foam improves starting and increases fuel efficiency. Power Foam penetrates and thoroughly cleans the engine’s intake system, freeing sticky valves, cleaning dirty spark plugs and removing gum, varnish and carbon deposits from exterior engine surfaces more information
Heavy-Duty Degreaser
 Fast-Acting Equipment and Surface
Degreaser
AMSOIL Heavy-Duty Degreaser is
formulated with powerful and fast-acting solvents, attacking
petroleum-based grime on a molecular level to loosen its
hold on metal, concrete, engines and other surfaces. Its
active citrus formula makes cleaning easy and leaves a clean
scent.
more information
MP Metal Protector
 Metal
Protector are easy-to-use spray-on
products that protect metal surfaces, displace water and silence
squeaks. MP cuts through rust and corrosion to restore free movement
of “frozen” hardware parts.
AMSOIL MP is
the product of choice for drying electrical and ignition systems and
protecting electrical equipment from freshwater and saltwater
damage. It contains no silicone.
more information
Heavy Duty Metal
Protector
 AMSOIL
Heavy Duty Metal Protector is
the product of choice for metal surfaces that require a heavy duty
lubricant or are exposed to the damaging effects of salt, moisture
or chemical corrosion. It is ideal for hinges, wire ropes and
springs, nuts and bolts, motorcycle or bicycle chains, and for
undercoating wheel wells and other metal surfaces exposed to water,
dirt or road salt.
more information
Silicon Spray
 Perfect for
lubricating non-metallic surfaces that come into contact with metal,
nylon, cardboard, fiberglass, wood or plastic surfaces. Use anywhere
a light-duty or silicone lubricant is required. Special non-staining
formula. USDA H-1 rated for incidental contact with food. Excellent
for waterproofing leather boots, shoes, jackets, suede, etc.
more information
Engine and
Transmission Flush
 AMSOIL Engine and Transmission Flush
helps restore fuel economy, increase operating efficiency and reduce
emissions in gasoline and diesel engines, and automatic
transmissions. Its potent, detergent-based formula cleans sludge and
deposit build-up, promoting lower operating temperatures and reduced
oil consumption. AMSOIL Engine and Transmission Flush is safe on
parts and can be easily disposed of with waste oil.
more information
Brake
Fluids
 High-temperature performance in auto/light-truck, high-performance,
racing and powersports applications. High-temperature stability, yet
flows easily at low temperatures. Helps keep water in suspension,
slowing its effects on the brake system. High boiling temperatures
ensure maximum life and reliable braking power.
DOT
3&4 more information
Universal Power Steering Fluid
 AMSOIL
Synthetic Universal Power Steering Fluid provides excellent wear
protection. Its synthetic formulation delivers better lubricity and
reduced friction, resulting in cooler operating temperatures, longer
component life and quieter operation. AMSOIL Power Steering Fluid is
formulated with a high viscosity index. Its low pour point ensures
immediate lubrication at startup and in cold temperatures, yet it
resists thermal breakdown and maintains maximum protection in high
temperatures.
more information
Oil Analysis
Oil analysis enables maintenance personnel to evaluate motor oil service life and engine condition and save significantly on downtime, equipment repair and oil-related costs.
- Oil Analyzers Inc. puts technologically advanced testing equipment in the hands of experienced diagnosticians.
-
Accurate, reliable Oil Analyzers Inc. findings may be used to reduce equipment replacements and repairs, reduce the volume of lubricant purchased and destined for disposal and reduce equipment downtime.
-
Oil Analyzers Inc. normally turns out reports one working day after a sample is received. When a time-sensitive condition is detected, OAI calls with the information.
-
Oil Analyzers Inc. kits include everything required for analysis: sample gathering materials, sample testing and, in the
UPS, return postage.
-
Oil Analyzers Inc. offers a quantity discount over the single kit price on orders of 10 or more kits.
Note: Sampling Pump
and Hose are sold separately
More Infomation and Product
Application
|
