Motor Oil Comparison
AMSOIL Synthetic 10W-30 Motor Oil
(ATM) and 10 competing conventional, synthetic and synthetic blend 10W-30
motor oils were subjected to a series of motor oil tests. All six tests
were completed in accordance with American Society of Testing and
Materials (ASTM) test procedures, with the results directly indicating the
level of protection and performance provided by each of the tested oils.
When testing concluded, AMSOIL Synthetic Motor Oil overwhelmingly emerged
as the top-performing oil in the group. No oil outperformed AMSOIL in any
of the tests. A comparison also reveals the total cost of using AMSOIL
Synthetic Motor Oil is less over 25,000 miles than all the competing motor
oils. The following brands were tested.
To
see oil comparisons with Hydrotex, Lucus, Mobil 1, Red Line, and
RoyalPurple scroll to the bottom of this page. |
Extends Oil Life The Thin Film Oxygen Uptake Test (TFOUT) is used to
evaluate an engine oil’s ability to resist heat and oxygen breakdown
when contaminated with oxidized/nitrated fuel, water and soluble metals
such as lead, copper, iron, manganese and silicon. The higher the
number, the better the resistance to chemical breakdown.
AMSOIL Synthetic Motor Oil has superior heat and
oxidation resistance to control sludge deposits and extend oil life.
Engines stay clean for maximum protection and oil changes are reduced,
saving time and money
To see a larger image click on it
|
|
|
|
Maximizes Fuel Economy, Reduces Oil Consumption and Emissions The NOACK Volatility Test determines the temperature
service. The more motor oils vaporize, the thicker and heavier they become,
contributing to poor circulation, reduced fuel economy and increased oil
consumption, wear and emissions. The lower the number, the better the
resistance to vaporization.
AMSOIL Synthetic Motor Oil resists high temperature
volatilization (evaporation) better than other motor oils. AMSOIL Synthetic
Motor Oil maintains peak fuel efficiency and reduces oil consumption and
emissions.
To see a larger image click on it
|
|
|
|
Improves Cold Temperature PerformanceThe Pour Point Test determines the lowest
temperature at which a lubricant will flow. The lower a lubricant’s pour
point, the better protection it provides in low-temperature service.
Unlike conventional oils that solidify in cold temperatures,
AMSOIL Synthetic Motor Oil remains fluid down to -54° F. AMSOIL
Synthetic Motor Oil helps engines turn over easier and flows
quickly to engine parts for critical start-up protection.
Engines start faster and wear is greatly reduced for extended
engine life.
To see a larger image click on it
|
|
|
|
Controls Acid Formation Total Base Number (TBN) is the measurement of a
lubricant’s reserve alkalinity, which aids in the control of acids formed
during the combustion process. The higher a motor oil’s TBN, the more
effective it is in suspending wear causing contaminants and reducing the
corrosive effects of acids over an extended period of time.
The high TBN of AMSOIL Synthetic Motor Oil allows it to
effectively combat wear-causing contaminants and acids, providing superior
protection and performance over extended drain intervals.
To see a larger image click on it
|
|
|
|
Helps Engines Start Easier The Cold Crank Simulator Test determines the apparent
viscosity of lubricants at low temperatures and high shear rates. Viscosity
of lubricants under these conditions is directly related to engine cranking
and startability. The lower a lubricant’s cold crank viscosity, the easier
an engine will turn over in cold temperatures.
The low cold-crank viscosity of AMSOIL Synthetic Motor
Oil reduces drag on moving engine parts and allows engines to achieve
critical cranking speed in frigid temperatures. Engines turn over quickly
and dependably in the coldest winter temperatures and motor oil flows to
critical areas requiring immediate lubrication, protecting against wear at
start-up.
To see a larger image click on it
|
|
|
|
Protects Against Wear The Four-Ball Wear Test evaluates the protection
provided by engine oil under conditions of pressure and sliding
motion. The size of the scar left as a result of the test determines
the amount of wear protection the lubricant provides. The smaller the
wear scar, the better the protection.
Tests show that no other motor oil demonstrates
better anti-wear performance than AMSOIL Synthetic Motor Oil. With
AMSOIL Synthetic Motor Oil, engine life can be extended and major
repairs are often reduced.
To see a larger image click on it
|
|
|
|
Saves Money Saves Money By extending oil drain intervals
through its premium formulation, AMSOIL Synthetic Motor Oil saves
drivers money. A value comparison shows AMSOIL Synthetic Motor Oil costs
less than competing motor oils over 25,000 miles.
While competing motor oils must be changed up to
five times over 25,000 miles, AMSOIL Synthetic Motor Oil is only changed
once, saving both time and money through reduced labor, oil and filter
costs.
To see a larger image click on it
|
|
|
|
Product
Application and Cross Referance Guides
Order AMSOIL oil and lubricants today and start experiencing the benefits of the best motor oil.
The AMSOIL Online Product Application Guide gives
you fast, easy access to vehicle data.
Our Online Product Application Guide is an interactive tool that
provides you with comprehensive information for all your lubricant,
air and oil filtration, spark plug, wire set, and wiper blade needs.
No other company offers you this type of access to product
application information and ordering convenience! The
Filter Cross Reference guide
will return the corresponding AMSOIL, Donaldson, MANN, and WIX
filter(s) for any manufacturer filter number. AMSOIL provides
filters for both Car/Light truck, Motorcyles, Powersports, Small
Engine, Vintage, and Heavy Duty applications. Be sure to print
out your vehicle information and save in a convenient location for
future reference. Scan the code to go to the mobile version on the
Online Product Application Guide or go to mobile.syntheticoils.us
Which
Products Should I Use In My Vehicle? Ask Us Now...
Contact Jeff Fisher
a Independent AMSOIL Dealer today at 866-292-4700 or by e-mail to find out more about wholesale pricing, and get a savings of 20%-25% off retail on your AMSOIL purchases.
Learn More
|