| |
Search Our Site
/>
|
|
|
4-Cycle
Oils
 |
10W-30 & 10W-40
AMSOIL
Synthetic Marine Engine Oil is a premium synthetic
formulation designed to withstand the heat and stress of
high-rpm operation and deliver excellent wear protection. It
protects against rust and corrosion during periods of
inactivity and long-term storage to keep your engine
protected, even when it’s not running. AMSOIL Synthetic
Marine Engine
Oil is perfect for hardcore anglers and
boating enthusiasts who demand the best protection for their
marine engines
25W-40 Synthetic Blend Marine
Engine Oil
Engine performance and reliability
are key to a successful day fishing or boating. High-rpm
operation and constant exposure to water, however, invite
engine wear and formation of rust and corrosion, reducing
engine performance and life. AMSOIL 25W-40 Synthetic Blend
Marine Engine Oil guards against wear while delivering
excellent protection against
rust and corrosion. It is
Warranty Secure® and will not void your marine engine’s
warranty
more
infomation |
|
2-Cycle Oils
|
Today’s
high-stress, high-revving, two-cycle motorcycle engines demand
superior lubrication for optimal performance. Two-cycle engines in
motorcycles are frequently pushed to severe operating conditions and
abuse which results in high engine temperatures and dirty operating
conditions.
AMSOIL
Synthetic 2-Cycle Oils provide maximum protection and performance in
two-cycle gasoline engines. AMSOIL Synthetic 2-Cycle Oils control
engine operating temperatures, increase power output and keep
engines cleaner than petroleum oils. AMSOIL Synthetic 2-Cycle Oils
also provide maximum oxidation protection, anti-corrosive
characteristics and improved operation in low temperatures.
more
infomation
|
 |
Fuel Additives
|
Gasoline Stabilizer
 It is
difficult to drain all of the fuel from equipment before storage,
and doing so would expose the system to other problems, including
the formation of rust and corrosion on the bare metal in the tank
and fuel system and drying and cracking of gaskets and seals. Some
fuels are pre-treated with oxidation inhibitors that allow them to
be stored for short periods without forming excessive deposits,
while other fuels have no inhibitors at all.
AMSOIL
Gasoline Stabilizer extending engine life and reducing operating
reduces the oxidation process that occurs when fuel is stored for
extended periods. It prevents the formation of varnish and sludge
which can clog injectors, stick floats and cause poor engine
performance. AMSOIL Gasoline Stabilizer is ideal for stored
seasonal equipment such
as motorcycles, snowmobiles, lawnmowers and boats. The treat rate is
one ounce with every 2.5 gallons of fuel. One bottle treats 40
gallons.
more information
|
|
DOMINATOR® Octane Boost
 Maximizes power and improves performance in all two-cycle and
four-cycle gasoline engines. Increases octane number up to seven
points. Reduces engine knock, improves ignition and engine response,
helps fuel burn cleaner and inhibits corrosion. Recommended for
off-road and racing use.
-
Improves
performance
-
Maximizes
power
-
Improves
ignition
-
Helps fuel
burn cleaner
-
Removes
carbon deposits
-
Reduces
engine knock
-
Improves
responsiveness
more information
|
Quickshot SE
 Quickshot SE is a premium fuel
additive formulated to thoroughly clean and restore peak performance.
For use in all two and four-stroke
gasoline-powered engines, including motorcycles, snowmobiles, boats,
personal watercraft, ATVs, edgers, tillers, mowers, snowblowers,
chainsaws, generators and farm and construction equipment . It also
stabilizes fuel between uses and during short-term storage periods.
Its revolutionary technology focuses on three major fuel-related
issues plaguing small engines and powersports equipment: ethanol,
water and dirty pump gas.
more information
Greases
|
Water
Resistant Grease
 Synthetic Water Resistant Grease is an extreme-pressure
lithium-complex wheel bearing grease specially formulated for
extreme resistance to water washout. It is the grease of choice for
protection of frequently wetted components, such as marine trailer
wheel bearings. AMSOIL Water Resistant Grease forms a shield against
rust and corrosion, protecting components during use and storage.
AMSOIL Water Resistant Grease also offers outstanding extreme
temperature performance for
rapid cold-temperature lubrication and protection and dependable
high-temperature lubrication and protection. Its outstanding
friction-reducing ability enhances fuel efficiency and power.
more information
Multi-Purpose Grease
 The correct
consistency grade of AMSOIL Synthetic Multi-Purpose Grease is
recommended in heavy and light duty applications found in
manufacturing plants, automobiles, agricultural and construction
equipment.
These include,
but are not limited to, roller bearings, plain bearings, thrust
bearings, gears, electric motors, presses, winches, bushings, wheel
bearings, chassis lubrication, universal joints, ball joints,
tie-rod ends, and steering knuckles. AMSOIL Synthetic Multi-Purpose
Greases are suitable for use up to 350 degrees F. When operating at
elevated temperatures, frequent regreasing may be required.
more information
| |
Series 2000 Racing
Grease
 AMSOIL
Series 2000 Synthetic Lithium Complex Racing Grease meets the highest performance standards of the
National Lubricating Grease Institute, GC for wheel bearing
applications and LB for chassis applications.
Ultimate
protection for hard-driven, high performance vehicles. Dramatically
reduces friction and wear for improved performance. Excels at both
high- and low-temperature performance. Outperforms other
conventional and synthetic greases.
more information
Spray Grease
 AMSOIL Spray Grease effectively reduces
friction and wear, keeping components running clean and trouble-free
for outstanding performance and long life. It applies quickly and
evenly and is ideal for greasing hard-to-reach equipment, including
hinges, springs and other common applications.
more information
|
|
Maintenance & Accessory Products
Heavy Duty Metal
Protector
 Made
with special rust and corrosion inhibitors. Excellent on metal surfaces,
leaves a long-lasting protective coating. Protects against the effects
of salt, moisture & chemical corrosion. Works as an undercoat, leaving a
wax-like film. Recommended for motorcycle chains. Won’t “sling-off”. Dry
to the touch.
more information
MP Metal Protector
 High-Performance
Spray-On Metal Surface Protectant
Displaces water and protects metal surfaces from rust
and corrosion. Provides a light film that prevents metal-to-metal contact.
Excellent for use on guns, hinges, squeaky mechanical objects, electrical
systems and more. Penetrates existing rust buildup. Also dries wet
electrical systems.
more information
Engine Fogging Oil
 Two and
four-stroke motorcycles are commonly operated seasonally or
infrequently, and then stored for long periods of time. During these
periods of inactivity, and as a result of fluctuations in ambient
temperatures, water vapor can form condensate within the engine,
eventually becoming surface corrosion on cylinder liners, piston
rings, anti-friction bearings and steel/iron contact surfaces on
rotation seals.
AMSOIL Engine
Fogging Oil offers superior film retention, providing long-term
protection against corrosion and dry starts, extending engine life
and reducing operating expenses. Its aerosol
spray formulation offers easy and clean applications, while reaching
more
components and offering better distribution than straight motor
oil.
more information
Power Foam
 Carburetor
and Induction System Cleaner for Two - and Four-Stroke Gasoline Engines
Improves engine performance by removing gum, varnish
and carbon deposits that affect power, operation, idle and fuel economy.
Power Foam cleans intake valves, intake manifolds and throttle plates to
keep the combustion intake system running at peak efficiency. Helps reduce
engine ping and keeps carburetors and injector systems operating like new.
more information
Heavy-Duty Degreaser
 Fast-Acting Equipment and Surface
Degreaser
AMSOIL Heavy-Duty Degreaser is
formulated with powerful and fast-acting solvents, attacking
petroleum-based grime on a molecular level to loosen its
hold on metal, concrete, engines and other surfaces. Its
active citrus formula makes cleaning easy and leaves a clean
scent.
more information
Silicon Spray
 Perfect for
lubricating non-metal surfaces that contact metal such as nylon,
cardboard,
fiberglass, wood or plastic surfaces. Special
non-staining formula. USDA H-1 rated for incidental contact with
food. Excellent for waterproofing leather boots, shoes, jackets, suede etc.
more information
More Infomation and Product
Application
Performance Products for Recreational
Four-Stroke Vehicles
|
|
